One25AS
Active full range monitor for in-wall mounting
Amphion One25A is available as an S (soffit) version, which is suitable for soffit mounting. Instead of being placed behind the speaker, the electronics are housed in a standard 19” rack mountable enclosure. This allows the speakers to be soffit mounted or the electronics placed together with the other studio equipment.
Unique highlights
Industry leading translation
Trusting what you hear builds confidence, ensures better results and raises productivity. Amphion monitoring allows focusing on things that count which saves time and helps meet the ever tightening deadlines.
Pinpoint imaging
Due to their phase coherence and pinpoint imaging, Amphion monitors translate precisely to any playback device, as they allow you to correctly reproduce information in all planes including width, height, and depth.
Simple, refined signal path
Active speakers typically suffer from a lack of resolution due to their complex signal paths. The One25A is free of dynamics and detail-degrading DSP and AD/DA stages, which leads to maximum resolution and performance.
Isolated independent chambers
New midrange and tweeter are in an isolated sealed chamber which minimizes the bass woofer’s negative effects like pressure changes, leading to high midrange and treble resolution ensuring crystal clear transparency.
Acoustic symmetry
The baffle around the midrange is acoustically symmetrical, which leads to smooth frequency curve and precise imaging. Amphions proprietary 5th generation U/D/D improve driver integration and speaker performance in a room.
External Electronics
The electronics of One25A are housed outside the cabinet in a rigid steel enclosure. This ensures optimal ventilation, lower operating temperatures and minimises the harmful effects of vibration and magnetic stray fields.
Specifications
Bass 700 W, Tweeter & Midrange 2 x 205W
0,002%
230 V / 50 Hz or 115 V / 60 Hz (Factory preset)
Balanced XLR Input, 1x Female XLR, pin 2-hot
2 x Neutrik speakON 4 Pole
8-step low frequency adjustment boundary control (+/-7dB)
19” rack mountable, steel chassis with aluminum cover, 3U recommended for airflow and ventilation
Front
62 x 483 x 232 mm
5.5 kg (12 lbs)
Active, 3-way, sealed cabinet
1″ titanium tweeter (new)
5¼″ aluminium mid (new)
10″ aluminium bass
100 Hz / 2000 Hz
22 – 55 000 Hz (-3dB)
105 dB
2 x Neutrik speakON 4 Pole
316 x 510 x 427 mm
41 kg (90.4 lbs)
Features
Boundary control
One25A’s boundary control system allows fine tuning the bass response in eight steps (+/- 7dB measured at 20Hz). The adjustment is a smooth shelf-type curve mostly operating at frequencies below 150Hz.
Protection circuit
One25A houses an overload protection circuitry which is only active when needed. Instead of muting or cutting the signal, the limiting circuitry is designed to keep the workflow undisturbed and music playing.
Videos
News & Reviews
Measurements
Frequency response
Boundary control
Because all real control rooms have at least one surface (a floor) the speaker low end (below 100Hz) is measured in half free space. This gives a fairly accurate estimation of a very large control room, with the speaker placed far from back and side walls. As the room size decreases, the amount of bass increases, which means that the smaller speaker models are particularly well suited to smaller rooms which will support the bass response of the speaker. In other words, the plotted frequency response corresponds to the minimum amount of bass you can expect in any control room.